Integration / Other
Bolt Iot integration
Bolt IoT is an integrated platform that enables users to build IoT projects by connecting sensors and actuators to the internet, offering cloud-based control and monitoring capabilities.
About Bolt Iot
Bolt IoT is a platform for building and managing IoT projects with cloud-based device control and monitoring. It makes connecting sensors and actuators to the internet seamless for automation and data insights.
All integrations- Category
- Other
- Connection
- API key
- Type
- Tool
- Actions
- 6
- Tags
- library
Example prompts
What you can ask Growf to do with Bolt Iot
- “Read temperature sensor value from pin A0”
- “Turn on relay connected to digital pin 1”
- “Check if device BOLT12345 is online now”
- “Send command to actuator and read response”
Available actions
6 actions your agents can run in Bolt Iot
Analog Read
Tool to read the analog value from a specified pin on a Bolt device. Use when you need sensor readings (0–1023) after confirming the device is online.
Check Bolt device online status
Tool to check whether a specified Bolt device is online. Use when you need to verify device connectivity before sending commands (e.g., control signals). Example: 'Check if device BOLT1234567 is online.'
Bolt IoT Digital Write
Tool to set a digital pin HIGH or LOW on a specified Bolt device. Use when controlling actuators or LEDs via digital output.
Bolt IoT Serial Read
Tool to read incoming serial data from a Bolt device. Use when you've initialized UART with serialBegin and need to retrieve serial data.
Bolt IoT Serial Write
Tool to send serial data to a Bolt device. Use when you need to transmit ASCII data over UART after initializing UART with serialBegin.
Bolt IoT Serial Write & Read
Tool to send serial data and read the response on a Bolt device. Use when you need to transmit ASCII data over UART and capture its reply immediately.
Put Bolt Iot to work inside Growf.
Connect it once and every workspace, agent and workflow can use it — securely, with your team in the loop.